1. Preparation
1. Turn off the power of the machine and unplug the power plug to avoid safety accidents.
2. Prepare the tools required for disassembly, including wrenches, screwdrivers, pliers, etc.
3. Install a bracket or lifter to lift the feed pellet machine to a suitable height during disassembly.
4. Prepare enough working space for disassembly, cleaning and maintenance.
| 125 | 80-100kg/h | 3kw | 110*35*70 cm | 95 kg |
| 150 | 120-150kg/h | 4kw | 115*35*80cm | 100 kg |
| 210 | 200-300kg/h | 7.5kw | 115*45*95cm | 300 kg |
| 260 | 500-600kg/h | 15kw | 138*46*100cm | 350 kg |
| 300 | 700-800kg/h | 22kw | 130*53*105cm | 600 kg |
| 360 | 900-1000kg/h | 22kw | 160*67*150cm | 800 kg |
| 400 | 1200-1500kg/h | 30kw | 160*68*145cm | 1200 kg |
2. Disassembly steps
1. Disassemble the machine casing: first find the fixing screws of the machine, loosen the fixing screws with a wrench or screwdriver, and remove the machine casing.
2. Disassemble the rotor: Use a wrench or pliers to disassemble the rotor, and check whether the rotor is worn or deformed before disassembly. If so, it should be replaced in time.
3. Disassemble the screen: Use a wrench or screwdriver to disassemble the screen, be careful not to damage the screen, and do not damage or deform the screen.
4. Clean all parts: Clean all disassembled parts and thoroughly remove all kinds of residues, especially grease and other substances.
5. Check spare parts: Check whether all parts of the machine are worn or damaged. If so, replace or repair them in time.